AGRO cooler in a dusty environment

ResfriAgro cooler in a dusty environment 12V with integrated water tank

Roof air conditioner ResfriArgo is especially designed to work in agriculture.
It can also be used where it is needed good air filtration - the ability to work in a dusty environment.

Because of the integrated reservoir is not required outside the installation of the tank on the cab rear wall.

The device has a triple filter dust, so that the inside of the vehicle cabin gets virtually no pollution. The tank in the device, just to-day operation. The device works perfectly during the steamy days, cools and ventilates the driver's cabin.

An air conditioner is composed of cooling units installed on the roof in place of the sunroof. Creates and ensures a steady flow of moist air into the cabin with electric fan through a straw / fiber filter moistened with water.

The device can be controlled by the control panel on the device while driving.
An air conditioner using air cooling process during evaporation of the water (in the moment when such a temperature causes evaporation).

As a result, the cooler air stream flowing through the air conditioner inside the cab.

Product is very popular for many years in countries such as Spain, Portugal, France, Germany, Belgium, Netherlands, Luxembourg and Denmark.

Benefits Conditioners:

* Works both when switched on and switched off the engine !!!
* Air conditioner improves work efficiency drivers
* Low operating costs
* An air conditioner has a small current consumption and is powered exclusively by battery
Specifications:
• Supply voltage 12 V
• Low current consumption: 3.35 AMP / average, 12V
Minimum 0.05 A / h
Average 3.20 A / h
Maximum 8,7 A / h

Maximum tilt of 15°

• The fan has a max speed of 10 otáčkových. 4088 rev / min
• Delivering air at max. 400 m3 / h
• Integrated water tank containing 15 L lasts 8-22 hours continuous operation
• Motor-inspiring air is Bosch and water pump VDO.
• Dimensions conditioner / HxWxL / 21 x 85 x 75 cm
• Water consumption 500-1'500 ml / h (depending on external temperature and humidity)

By default, the device is delivered with a white cover.
The device is connected to the detailed installation instructions, assembly time in service is between 3-4 hours.

Dimensions inside the covers:

small 52,5x47,5 cm
Central 71,5x56,5cm
large 91x59,5cm