Blue SMART IP22 charger 12V / 20A lead and Li-Ion batteries with Bluetooth interface

Blue SMART IP22 charger 12V / 20A lead and Li-Ion batteries with Bluetooth interface

The Blue Power Charger IP22 is a highly efficient automatic charger for professional charging of lead and Li-Ion batteries with a 5-year warranty.

The built-in Bluetooth interface allows you to set the values of the charger, read the voltage and the current charging current via a smart device (mobile or tablet with Android or iOS). It is also possible to update the charger software, the manufacturer can add charging programs and characteristics for new types of batteries on the market, etc.

The charger excels with top efficiency of up to 93-94%, which generates up to 5 times less heat than the industry standard. As soon as the battery is charged, the consumption drops below 0.5W.

The charging characteristic is adaptive 6-stage: test / bulk / absorption / reconditioning / float / storage.

The processor-controlled adaptive characteristic guarantees automatic optimization of the charging process, which takes into account the way the battery is used and discharged.

Storage Mode: This is less maintenance and slower battery aging when not in use

Whenever the battery is not used during the last 24 hours, the charger switches to Storage mode. During this, the voltage drops to 2.2V per cell (13.2V for a 12V battery). This minimizes battery gassing and corrosion of the positive plates. Once a week, the voltage is briefly increased to Absorption voltage, which equalizes the voltage on the cells, mixes the electrolyte and thus prevents possible sulfation of the battery.

Blue Smart IP 22 chargers also charge LiFePO4, for which the charger contains a modified charging program

NOC and LOW program

If you set the NOC or LOW program on the charger, the charger will go into restricted mode, turn off the fan and charge a maximum of 25% of its rated power. The charger is then absolutely quiet, this mode is automatically terminated after 8 hours or by the user.

The output current of the charger is automatically limited at higher temperatures up to 50 ° C. This guarantees a long charger life even in extreme working environments.

Eleven LEDs are used to display the current status, displaying individual charging algorithms: TEST, BULK, ABSORPTION, RECONDITION, FLOAT, STORAGE, READY, as well as NORMAL (14.4V), HIGH (14.7V), RECONDITION and LI-ION modes.

Charger parameters:

• Input voltage: 180-265 V AC, 45-65Hz
• Charging current, normal mode: 20A
• Charging current, NIGHT or LOW: 10A
• Efficiency: 93%
• Charger power without load: 0.5W
• Number of outputs: 1
• Charging voltage Absorption: Normal 14.4V, High 14.6V, Li-Ion 14.2V
• Float charging voltage: Normal 13.8V, High 13.8V, Li-Ion 13.35V
• Storage charging voltage: Normal 13.2V, High 13.8V, Li-Ion n.a.
• Charging algorithm: 6-stage, adaptive
• Can be used as a source: Yes
• Protections: polarity reversal (fuse), output short circuit, overheating Working temperature: -20 ° C to + 50 ° C
• Non-condensing humidity: max 98%
• Battery connection: screw terminals for connecting wires up to 13mm2 (charger does not contain cables for battery connection)
• Connection to 230V: 1.5 m cable
• Water protection: IP22
• Dimensions: 235/108/65 mm
• STANDARDS
• Safety: EN 60335-1, EN 60335-2-29
• Emissions: EN 55014-1, EN 61000-6-3, EN 61000-3-2
• Resistance: EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
• Automotive homologation: E4-10R