Blue SMART IP22 charger 12V / 20A (three outputs)

Blue SMART IP22 Charger 12V / 20A Lead and Li-Ion Battery with Bluetooth Interface - Three Outputs

The Blue Power Charger IP22 is a highly efficient automatic charger for professional charging of lead and Li-Ion batteries with a 5-year warranty.
Built-in Bluetooth interface allows you to set the values of the charger, read the voltage and the current charging current through a smart device (mobile or tablet with Android or iOS). It is also possible to update the charger software, the manufacturer can add charging programs and characteristics for new types of batteries on the market, etc.
The charger excels in peak efficiency of up to 93-94%, generating up to 5 times less heat than the industry standard. When the battery is charged, power consumption drops below 0.5W.
The charging characteristics are adaptive 6-stage: test / bulk / absorption / recondition / float / storage.
The processor-controlled adaptive characteristic ensures automatic optimization of the charging process, taking into account the way the battery is used and discharged.
Storage mode: less maintenance and slower battery aging when not in use
Anytime the battery is not used for the last 24h, the charger will switch to Storage mode. During it, the voltage drops to 2.2V per cell (13.2V for a 12V battery). This minimizes battery gassing and positive plate corrosion. Once a week, the voltage is increased to the Absorption voltage for a short time, thereby equalizing the voltage on the cells, electrolyte mixing and avoiding possible battery sulphation.
The Blue Smart IP 22 chargers also charge LiFePO4, for which the charger has a modified charging program
NIGHT and LOW program
If you set the NIGHT or LOW program on the charger, the charger will go into restricted mode, turn off the fan, and charge a maximum of 25% of its rated power. The charger is then absolutely silent, This mode is automatically terminated after 8 hours, or by the user.
The charger output current is automatically limited at higher temperatures up to 50 ° C. This ensures a long battery life even in extreme working environments.
There are eleven LEDs displaying the current status displaying individual charging algorithms: TEST, BULK, ABSORPTION, RECONDITION, FLOAT, STORAGE, READY, as well as NORMAL (14.4V), HIGH (14.7V), RECONDITION and LI-ION modes
Charger parameters:
Input voltage: 180-265 V AC, 45-65Hz
Charging current, normal mode: 20A
Charging current, NOC or LOW: 10A
Efficiency: 93%
Charger power without load: 0,5W
Number of outputs: 3 (charger allows to charge independently 3 batteries, output power is divided between them)
Charging Voltage Absorption: Normal 14.4V, High 14.6V, Li-Ion 14.2V
Float Charging Voltage: Normal 13.8V, High 13.8V, Li-Ion 13.35V
Charging voltage Storage: Normal 13.2V, High 13.8V, Li-Ion n.a.
Charging algorithm: 6-stage, adaptive
Can be used as a source: Yes
Protections: reverse polarity (fuse), short circuit at the output, overheating
Operating temperature: -20 ° C to + 50 ° C
Non-condensing humidity: max 98%
Battery connection: screw terminals for wire connection up to 13mm2 (battery charger not included)
Connection to 230V: 1.5m cable
Protection against water: IP22
Dimensions: 235/108 / 65mm
STANDARDS
Safety: EN 60335-1, EN 60335-2-29
Emissions: EN 55014-1, EN 61000-6-3, EN 61000-3-2
Resistance: EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
Automotive homologation: E4-10R