Flexible solar panel ETFE 105W / 105Wp

Flexible solar panel ETFE 105Wp 12V

The photovoltaic panel is made of monocrystalline silicon. It is light and partly flexible and is mainly intended for mounting on rounded surfaces up to 180°, e.g. on boats or caravans. It is equipped with 90 cm long cables with MC4 terminals. It is designed for a system voltage of 12V.

Ultra-light: Incredibly light (only 1.7kg) and very thin (just 2.0mm)

Aesthetics: Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions, with patented materials and sophisticated manufacturing process results in a high-efficiency, attractive panel, with no light pollution PID-free operation and high levels of safety

Weather resistant: High resistance to saltwater environments and the sealed waterproof design make this solar panel perfect for boats and marine applications.

Durability: Robust construction using plastic reinforced with glass fiber creates a sturdy and durable flexible solar panel, while special materials and stringent quality control ensure panel longevity

- greater cell efficiency of 24.8% and thus greater power output from the same area
- slightly slower "ageing" of silicon, i.e. panel performance decreases more slowly over time
- the coloring of the cells is homogeneous, the panels are not "stained"
- panel lifespan up to 15 years

Panel parameters:

Solar cell type: monocrystalline cell
Max. open-circuit voltage Voc=24.6V
Max. short-circuit current Isc=5.34A
Max. voltage: Vmp=21.6V
Max. current: Imp=4.86A
Working temperature: –20°C to +65°C
Max. system voltage: 600V
Dimensions 1040×503×2mm / 1.7kg
CE, RoHS

Construction
In the case of gluing a flexible panel to the roof of a vehicle, caravan, etc., it is necessary to take into account the different expansions of the material of the roof and the panel, which can cause damage to the flexible panel.
Please note: the flexible panel can only be bent on the longer side, at a maximum angle of 180°

In the case of gluing a flexible panel to a solid surface, the different expansions of the roof material and the panel must be taken into account, which can cause damage to the flexible panel on hot days.We therefore recommend gluing flexible panels to an intermediate layer made of the material "Makrolon Plaxiglas" (polycarbonate plate), which also allows air to flow under the solar panel, thus increasing its efficiency.

In the case of a laminate/sandwich roof, there is not as much damage to the panel, but we still recommend such an installation due to its long life and better cooling. For a tin roof, installation on Macrolon is essential.