LiFePO4 battery Ultimatron Smart BMS 12,8V/200Ah 2560Wh UBL-12-200AH

LiFePO4 battery Ultimatron Smart BMS 12,8V/200Ah

LiFePO4 batteries are lightweight, very easy to install and require no additional components.

The battery has an integrated BMS system that protects the battery from undercharging and overcharging.

You can monitor the status of this battery over the phone.

Detailed product description

The battery has an integrated BMS system and a safety disconnectorThe batteries are very easy to install and do not require any additional equipment.The internal switch disconnects the battery in the event of excessive discharge, overcharging or high temperature. It is therefore ideal as a replacement for systems with a lead-acid battery without the need to install additional protective elements.

Resistant to incomplete charging

Lead-acid batteries fail prematurely due to sulfation:

• If the battery is exhausted for a long time or is rarely fully charged.

• If left partially charged or completely discharged.

The lithium battery may not be fully charged.

Life even improves slightly with a partial charge instead of a full charge.

This is the main advantage of a lithium battery compared to a lead acid battery.

TECHNICAL PARAMETERS:
Nominal voltage: 12.8 V
Capacity 200 Ah
Energy: 2560 Wh
Charging voltage: 14.2-14.6V
Holding voltage: 13.6 V
Load disconnection: 10 V
Charging mode: CC/CV (1 phase constant current, 2 phase constant voltage MAX 2 HOURS)
Maximum charging current: 50 A
Peak discharge current: 150 A
Life: >3000 80% discharge cycles, >5000 50% discharge cycles
Self-discharge: 3% / month
Discharge option up to 0.1C (10% capacity)
Integrated automatic charging (BMS-battery management system) - bluetooth 4.0
Charging temperature: 0° to 45°C
Discharge temperature: -20° to 60°C
Storage temperature: –5° to 35°C
IP protection: IP65
Thread on battery contact: M8
Dimensions (LxWxH): 523x235x222mm (+-2mm)
Weight: 23.5 kg

It is possible to arrange up to 4 batteries in series to create a 24V, 36V or 48V system. We recommend inserting balancer(s) between the batteries.

Data sheet LiFePO4.pdf