Phoenix voltage converter from 12V to 230V pure sine 1200VA

Phoenix voltage converter from 12V to 230V pure sine 1200VA

Phoenix voltage converter with purely sinusoidal output voltage 230V. 5 year warranty!

The high proven reliability of Phoenix drives is due to the drive's topology, which has been tested for many years and uses a toroidal transformer at the output. The inverter is short-circuit proof and protected against overheating due to overload or high ambient temperature.

Drive configuration

Some parameters can be configured in the drive:

Undervoltage and battery overvoltage alarm and reset level

Drive off level at low and high battery voltage and reset level

Output voltage: 220/230 / 240V

Frequency 50Hz or 60Hz

ECO on / off mode and sensitivity setting (power at which "sleep" and "wake up"

High starting power You can rely on Phoenix drives whenever you need high starting power to power LEDs, halogen switching lights or tools.

ECO mode

When the drive is switched to this mode, it automatically switches to Stand by mode when the power drops below the set value. The inverter now switches on automatically, once every 2.5 seconds (adjustable). As soon as the consumption rises above the set limit, the inverter remains switched on. This reduces the drive's own power consumption several times (see specifications below).

Remote on / off

The remote control can simply be connected to the drive's two-pin connector, or between the plus battery and the left connector terminal.

Configuration is done via either the "VE.Direct to USB" cable or the "VE.Direct Bluetooth Smart Dongle".