Victron Energy SmartSolar MPPT SMART solar controller 12/24V 15A 100V

MPPT SMART solar controller Victron Energy 12/24V 15A 100V

Victron Energy provides an extended 5-year warranty on all MPPT controllers.

Ultra fast solar controller BlueSolar MPPT100/15.

Ultra fast MPPT (Maximum Power Point Tracking) Especially in the case of variable clouds, when the intensity of solar radiation is constantly changing, the controller responds very quickly and is able to increase profits by 30% compared to PWM controllers and up to 10% compared to conventional, slower, MPPT controllers.

BatteryLife revolutionary charging program

If the controller is not able to fully charge the batteries within one day, the result is a gradual discharge of the battery, this condition continues to deepen with each cycle. This will cause full discharge, the possibility of sulfation of the battery and subsequent destruction or significant loss of capacity within a few weeks or months. The BatteryLife charging algorithm monitors this condition and, if it starts to occur, it increases the load level from the battery every day until absorption charging is reached. From this point on, the value of the load disconnection will continue to be adjusted so that the absorption charging takes place approx. Every week.

The solar controller includes a temperature sensor that adjusts the charging voltage according to the ambient temperature.

The charging algorithm can be programmed as required using the software, the VE.Direct USB cable is used to connect to the PC, the Bluetooth interface can be connected to the controller. You can then view the current operating parameters on your smart device or change some of them.

The output is short-circuit proof and can supply capacitive loads such as inverters.

Automatic battery voltage detection.

It is possible to select the voltage value for connecting and disconnecting the load.

Maximum photovoltaic field power

12V - 145Wp, 24V - 290Wp

The voltage of the solar panels must exceed the battery voltage by at least 5 V for the controller to start working and charge the battery. The controller charges until the panel voltage is 1 V higher than the battery voltage.

Extensive electronic protection Protection against overheating and reduced performance at high temperatures. Short circuit and polarity reversal protection.

TECHNICAL PARAMETERS MPPT Blue Solar 100/15:

Operating voltage: 12/24 V (autodetection)

Maximum charging current: 15 A (20 A fuse)

Maximum panel power for 12V: 220 W

Maximum panel power for 24V: 440 W

If more than the maximum allowed power of the panels is connected to the controller, the controller limits the input power to 220 W, resp. to 440 W. The voltage from the panels must be greater than the battery voltage by 5 V for the controller to start working and charge the battery. The controller charges until the voltage from the panels is 1 V higher than the battery voltage.

• Automatic load disconnection in case of overload: yes
• Maximum panel voltage: 100 V
• Maximum efficiency: 98%
• Own controller consumption: 15 mA 24V, 25mA 12V
  
• Absorption voltage: 14.4 V / 28.8 V
• Float: 13.8 V / 27.6 V
• Charging algorithm: adaptive multistage
• Charging temperature compensation: - 16 mV / ° C resp. - 32 mV / ° C
• Continuous load current: up to 15 A
• Short-term load current: up to 50 A
• Voltage value for appliance disconnection: 11.1 V / 22.2 V or 11.8 V / 23.6 V or BatteryLife algorithm
• Voltage value for reconnecting and supplying appliances: 13.1 V / 26.2 V or 14 V / 28 V or BatteryLife algorithm
• Protections: reverse polarity of the battery poles (fuse), short circuit on the output, overheating
• Operating temperature range: from - 30 ° C to + 60 ° C (full power up to 40 ° C)
• Humidity: 100% (non-condensing)
• Communication port: VE.Direct Color: blue (RAL 5012)
• Maximum for connection to the terminal box: 6 mm2
• Degree of protection: IP 65
• Weight: 0.5 kg

Datasheet-Blue-Solar-Charge-Controller-MPPT-75-15-&-MPPT-100-15-EN.pdf

Manual-BlueSolarChargeController-MPPT-70-15.pdf