Vitrifrigo C39i CHR 12/24V 39L NextGen 0400-0604

Built-in refrigerator Vitrifrigo C39i CHR with fixed cooling unit.
The total refrigerator capacity is 39 litres, of which the freezer compartment has a volume of 3.6 litres.

Power supply is possible from 12 or 24 V DC.

CHR Airlock door and locking system

CHR represents a new door handle design with an Airlock system. Compared to the previous model, CHR refrigerator doors are lighter, the frame is thinner, and the door seal can be removed or replaced. The door panel has a matte finish, does not retain fingerprints, and can be removed and replaced with another panel with a thickness of 0.8–3 mm to match the kitchen design.

The AIRLOCK system performs several functions:

• secure refrigerator locking

• when using a mounting frame (not included, optional accessory – see related products), the refrigerator can be installed either flush with surrounding surfaces or with the door slightly protruding by approximately the door thickness; installation is very easy

• reversible door opening, door swing direction can be changed quickly and easily

• ventilation position of the handle, which keeps the door slightly open when the refrigerator is not in use

SECOP BDN50K – next generation compressor

The refrigerator is equipped with a hermetically sealed next-generation SECOP BDN50K compressor and an environmentally friendly R600a refrigerant. Compared to the previous compressor and refrigerant combination, this setup offers several significant advantages:

• lower energy consumption (C39i HP 0.219 kWh vs. C39i 0.250 kWh)

• compressor unit is 3 kg lighter than the previous version

• approximately 40% smaller compressor

• lower refrigerant operating pressure = longer service life

• significantly lower noise level

TECHNICAL SPECIFICATIONS C39i CHR HP Vitrifrigo:

• Total capacity: 39 litres

• Freezer compartment dimensions approx. (D/W/H cm): 22 × 24 × 9

• Freezer compartment volume: 3.6 litres

• Power supply: DC 12–24 V

• Interior light: yes

• Compressor: SECOP BDN50K, fixed installation

• Temperature control: mechanical rotary thermostat

• Rated power input: 31 W

• Energy consumption: 0.219 kWh / 24 h

• Insulation: CFC-free polyurethane foam

• External dimensions (W / D / H mm): 390 / 399 / 547

• Internal dimensions: detailed dimensions available in the image gallery

• Weight: approx. 13 kg

• Certification: CE, homologation

Advantages of compressor refrigerators compared to absorption (gas) refrigerators:

• 6–10 times higher cooling efficiency.

• Easy power supply from renewable energy sources – solar panels (100% independence).

• Faster cooling – cooling starts within minutes.

• Reliable low temperatures even when the refrigerator is tilted or exposed to high ambient temperatures.

• At least 1/3 lower weight.

• No need for exhaust ventilation or removal of high flame temperatures outside the living area.

• The cooling system is fully serviceable.