Voltage converter 24V to 12V 10A ORION IP67 24 / 12-10 waterproof design
DC / DC voltage converter Orion 24V to 12V 10A Victron Energy for demanding environments, IP67, waterproof (resistant to immersion in water for 30 minutes to a depth of 1m). Not isolated (common minus).
Completely encapsulated: waterproof, shockproof and protected design
- Water, oil or dust will not damage the Orion IP67 DC-DC. The cover is made of aluminum alloy and the electronics are encapsulated in resin.
Extra long input and output cables
- Thanks to the 1.8 m long cables, no connections need to be made, for most installation cases such long cables will suffice. This is an important feature for increasing reliability in areas of application where high water protection is required.
Wide input voltage range
- The inverter has a wide input voltage range of 15 to 40V DC. This ensures stable output power despite fluctuations in the input power due to disconnection or connection of other appliances to the same power supply battery.
Protected against overheating
- It can also be used in warm environments, such as engine rooms, see specifications for details.
TECHNICAL PARAMETERS ORION IP67 24 / 12-10
- Input voltage range: 15-40V DC
- Switch-off when voltage is reached: 13V
- Restart when voltage is reached: 14V
- No-load consumption: 20mA
- Output voltage: 12V DC +/- 3%
- Continuous maximum output current: 10A
- Efficiency: 93%
- Ripple, noise: 75mV pp
- Operating temperature (power reduction by 3% for each ° C above 40 ° C): -20 ° C to + 70 ° C (full power up to 40 ° C)
- Overload protection: by switching off, resuming automatically after removing the overload
- Short circuit protection: yes
- Reversal protection: no, external fuse or circuit breaker must be connected (not included)
- Packaging material: Aluminum
- Protection protection: IP67
- Input / output conductor cross section: 1.5 mm2 / 1.5 mm2
- Input and output cable length: 1.8 m
- Weight: 300g
- Dimensions: 74x74x32 mm
STANDARDS:
- Safety: EN 60950
- Electromagnetic immunity and emissions: EN 61000-6-3, EN 55014-1
- Regulations for vehicles: EN 55014-2, EN 61000-6-1, EN 61000-6-2
- Vibration: IEC68-2-6: 10-150Hz / 1.0G