Voltage converter from 24V to 12V 5A IP67 waterproof

Voltage converter from 24V to 12V 5A IP67 waterproof

Victron Energy 24V to 12V 5A Heavy Duty Power Converter, IP67, waterproof (resistant to immersion in water for 30 minutes to 1m). Uninsulated (common minus).
Completely encapsulated: waterproof, shockproof and protected design
Water, oil or dust will not damage the IP67 DC-DC. The housing is made of aluminum alloy and the electronics are embedded in resin.
Extra long input and output cables
Thanks to 1.8 m long cables, no connections are required, in most cases such long cables are sufficient. This is an important feature to increase reliability in areas of application where high waterproofing is required.
Wide input voltage range
The drive has a wide input voltage range of 15 to 40V DC. This ensures stable output power despite input power fluctuations due to disconnection or connection of other appliances to the same battery.
Protected against overheating
It can also be used in warm environments such as engine rooms, for details see specifications.
TECHNICAL PARAMETERS IP67 24 / 12-5
Input voltage range: 15-40V DC
Switch-off when voltage is reached: 13V
Restart when voltage is reached: 14V
Current consumption: 1mA
Output voltage: 12V DC +/- 3%
Continuous maximum output current: 5A
Efficiency: 93%
Ripple, noise: 75mV pp
Operating temperature (3% power reduction for each ° C above 40 ° C): -20 ° C to + 70 ° C (full power up to 40 ° C)
Overload protection: switch off, resume operation automatically after overload removal
Short circuit protection: yes
Reverse polarity protection: no, external fuse or circuit breaker required (not included)
Material: Aluminum
Protection degree: IP67
Cross-section of input / output wires: 0,8mm2 / 0,8mm2
Length of wires at input: 1,8m and output
Weight: 50g
Dimensions: (box) 25x43x20 mm, total length 61mm
Mounting hole pitch: 50mm
STANDARDS:
Safety: EN 60950
Electromagnetic immunity and emissions: EN 61000-6-3, EN 55014-1
Regulations for vehicles: EN 55014-2, EN 61000-6-1, EN 61000-6-2
Vibration: IEC68-2-6: 10-150Hz / 1.0G