code: | ev-charging |
Manufacturer: | Victron Energy |
Price with VAT : | 668,70 EUR |
Price without VAT : | 552,60 EUR |
VAT: | 21 % |
availability: | In Stock |
to send immediately |
The EV Charging station from Victron Energy is a high performance EV charging station
The station can operate three-phase and single-phase. It provides a maximum charging power of 22 kW AC in three-phase mode, or 7.3 kW in single-phase mode.
Built-in Wi-Fi communication
Wi-Fi: 802.11 b/g/n for configuration and traffic monitoring.
The internal Wifi module can be configured in Access Point mode or in Station mode for initial setup and monitoring.
LCD touch screen
It includes a 4.3-inch touchscreen LCD display for monitoring and control.
Light ring for quick display of device status
Fully programmable RGB light ring around the charging port for quick indication of device status.
From the web interface, it can be programmed to display different light effects according to the current state (unplugged, charging, charged, etc.). The aim is to help the user see the current status of the charging station remotely.
Two working modes are available:
1/ Manual mode for output current configuration
Manual mode allows you to configure the output current between 6-32A.
The charging performance is controlled in two ways: using the slider on the touch LCD display or using its website. Allows you to manually start or stop the charging process when the vehicle is connected to the charging station.
2/ Automatic mode to ensure maximum efficiency of the PV system
It detects when excess power is available and uses only that power to charge the vehicle.
Integration with GX Victron Energy devices
The EV charging station can be configured and monitored via the screen of the GX device (e.g. Color Control or GX TOUCH panel) and the remote console.
Integration with the VRM portal
Several options are available in the VRM portal: real-time reports, custom reports for configurable time periods, advanced features such as remote firmware update.
TECHNICAL PARAMETERS:
Input voltage: 170-265V AC
Charging current: 32A per phase
Nominal power: 22kW
Charging current range: 6-32A
Wifi standard: 802.11 b/g/n (2.4Ghz only)
Own consumption: 15mA@230V
Working temperature: -25°C to +50°C
Data communication: Modbus TCP over WIFI
Connection: 6-10mm2
Protection against water: IP44
Cooling: not necessary
Weight: 3kg
Dimensions: 390 x 300 x 150 mm