SmartSolar MPPT 150/35 regulator 12/24 / 48V 35A 150V with Bluetooth

SmartSolar MPPT 150/35 regulator 12/24 / 48V 35A 150V with Bluetooth

Victron Energy provides an extended 5-year warranty on all MPPT controllers.
Ultra-fast solar controller BlueSolar MPPT 150/35 (12/24/48V with Bluetooth that allows you to connect and monitor the status of your smartphone or tablet. This is a free application for Android and iOS VictronConnect available in the App Store and Google Play. you can monitor the voltage of batteries, panels, charging current and other parameters.It is possible to view the history of supplied and consumed energy, it is possible to set charging parameters (charging current and voltage), charging characteristics, etc. The options are given by the current software version. you can also update the controller firmware.

Ultra fast MPPT (Maximum Power Point Tracking)
Especially in the case of variable clouds, when the intensity of solar radiation is constantly changing, the controller responds very quickly and is able to increase profits by 30% compared to PWM controllers and up to 10% compared to conventional, slower, MPPT controllers.

BatteryLife revolutionary charging program
If the controller is not able to fully charge the batteries within one day, the result is a gradual discharge of the battery, this condition continues to deepen with each cycle. This will cause full discharge, the possibility of sulfation of the battery and subsequent destruction or significant loss of capacity within a few weeks or months.
The BatteryLife charging algorithm monitors this condition and, if it starts to occur, it increases the load off of the battery every day until absorption charging is reached. From this point on, the value of the load disconnection will continue to be adjusted so that the absorption charging takes place approx. Every week.
The solar controller includes a temperature sensor that adjusts the charging voltage according to the ambient temperature.
The charging algorithm can be programmed as required using the software, the VE.Direct USB cable is used to connect to a PC
The output is short-circuit proof and can supply capacitive loads such as inverters.
Automatic battery voltage detection.
It is possible to select the voltage value for connecting and disconnecting the load.

Maximum photovoltaic field power
12V - 500Wp, 24V - 1000Wp, 48V - 2000Wp
The voltage of the solar panels must exceed the battery voltage by at least 5 V for the controller to start working and charge the battery. The controller charges until the panel voltage is 1 V higher than the battery voltage.

Extensive electronic protection
Protection against overheating and reduced performance at high temperatures. Short circuit and polarity reversal protection.

TECHNICAL PARAMETERS MPPT SMART Solar 100/35:

• Operating voltage: 12/24/48 V (autodetection), 36V (software required)
• Maximum charging current: 35 A
• Automatic load disconnection in case of overload: yes
• Maximum panel voltage: 150 V
• Maximum short-circuit current of panels: 40A
• Maximum efficiency: 98%
• Own regulator consumption: 12V: 20 mA, 24V: 15mA, 48V: 10mA
• Absorption voltage: 14.4 V / 28.8 V / 43.2 V / 57.6 V adjustable
• Float: 13.8 V / 27.6 V / 41.4 V / 55.2V adjustable
• Charging algorithm: adaptive multistage
• Charging temperature compensation: - 16 mV / ° C resp. - 32 mV / ° C - 64 mV / ° C
• Protections: reverse polarity of the battery poles (fuse), short circuit on the output, overheating
• Operating temperature range: from - 30 ° C to + 60 ° C (full power up to 40 ° C)
• Humidity: 95% (non-condensing)
• Communication port: VE.Direct
• Color: blue (RAL 5012)
• Maximum for connection to the terminal box: 13 mm2
• Degree of protection: IP 43 electronics, IP22 connection
• Weight: 1.25 kg
• Dimensions (l x w x h): 130 x 186 x 70 mm

datasheet-smart-solar-15035-a-15045-en-6625.pdf

navod-k-pouziti-smart-solar-15035-a-15045-en-6626.pdf