STP AGGRESSIVE SILVER BULK PACK 12pcs 470x750x2mm = 4,23 m2 self-adhesive light elastic butyl with aluminum foil / anti-vibration and sound insulation

STP AGGRESSIVE SILVER BULK PACK 12pcs 470x750x2mm = 4,23 m2

Description

STP Aggressive Silver is a new self-adhesive, vibration-absorbing polymer material designed for car soundproofing. It has improved vibration damping characteristics in a wide temperature range. 

Compound:

• a layer of aluminum foil 90 microns;
• sticky polymer layer;
• protective release paper.

 Advantages:

• 15% lighter! The advanced polymer layer reduces sheet weight compared to StP Silver 2.0, 
• More plastic! It has become even easier and faster to mount the material on complex curved surfaces of the car.
• High heat resistance! The composition of the material has a special filler, which has a reinforcing effect and eliminates fluidity.
• Reliable protection against corrosion! The use of innovative additives allows you to create a strong bond with the metal, thereby eliminating body corrosion.

StP Aggressive Silver is mounted on clean, dry, painted metal surfaces, including those with complex relief. To clean the surface from dirt, it is recommended to use water with neutral detergents that do not contain organic solvents and alkali. Oily surfaces must be degreased with a solvent and dried. The working room should have a temperature of 18-30°C. The material is released from release paper, pressed against the treated surface, and carefully rolled until the embossing is completely smoothed out. Once dismantled, the product cannot be reused. Mounting on contaminated and corroded metal surfaces is not permitted.

It is important to avoid the formation of air bubbles between the material and the car body. Use the StP roller for mounting.

Characteristics of StP Aggressive Silver