Victron Energy SmartSolar MPPT 150/85-Tr VE.Can 12/24 / 48V 85A 150V with Bluetooth

Victron Energy SmartSolar MPPT 150/85-Tr VE.Can 12/24 / 48V 85A 150V with Bluetooth

Victron Energy provides an extended 5-year warranty on all MPPT controllers.

Ultra fast solar controller BlueSolar MPPT150 / 85-Tr VE.Can with Bluetooth enabling connection and status monitoring on your smartphone or tablet. This is done by a freely available application for Android and iOS VictronConnect available in the App Store and Google Play. You can then monitor the voltage of batteries, panels, charging current and other parameters on your mobile phone. It is possible to view the history of supplied and consumed energy, it is possible to set charging parameters (charging current and voltage), charging characteristics, etc. The options are given by the current software version. You can also use the specified software to update the controller firmware.

Ultra fast MPPT (Maximum Power Point Tracking)
Especially in the case of variable clouds, when the intensity of solar radiation is constantly changing, the controller responds very quickly and is able to increase profits by 30% compared to PWM controllers and up to 10% compared to conventional, slower, MPPT controllers.

BatteryLife revolutionary charging program
If the controller is not able to fully charge the batteries within one day, the result is a gradual discharge of the battery, this condition continues to deepen with each cycle. This will cause full discharge, the possibility of sulfation of the battery and subsequent destruction or significant loss of capacity within a few weeks or months.
The BatteryLife charging algorithm monitors this condition and, if it starts to occur, it increases the load off of the battery every day until absorption charging is reached. From this point on, the value of the load disconnection will continue to be adjusted so that the absorption charging takes place approx. Every week.

The solar controller includes a temperature sensor that adjusts the charging voltage according to the ambient temperature.

The charging algorithm can be programmed using software as needed, VE.Direct USB cable is used for connection to a PC.Settings can also be made using a smart device and the VictronConnect application.

The output is short-circuit proof and can supply capacitive loads such as inverters.

Remote On / Off, used for example to connect VE.BUS BMS (to end / start charging LiFePO battery).

Programmable relay - can be set (for example by telephone) to trigger an alarm or other conditions

Optional LCD Display - the LCD display can be very easily connected to the controller (not included, see related products or datasheet)

Automatic battery voltage detection. VE.Can + Bluetooth - thanks to the VE.Can interface, up to 25 controllers can be connected and synchronized, and 10 via Bluetooth

Remote on / off connector - for connection to VE.Bus BMS, for example, or another remote on / off controller

Maximum photovoltaic array power for a battery with rated voltage:
12 V - 1200 Wp, 24 V - 2400 Wp, 36 V - 3600 W, 48 V - 4900 W

If more than the maximum allowed power of the panels is connected to the controller, the controller will limit the input power. The voltage of the solar panels must exceed the battery voltage by at least 5 V for the controller to start working and charge the battery. The controller charges until the panel voltage is 1 V higher than the battery voltage.

Extensive electronic protection
Protection against overheating and reduced performance at high temperatures. Short circuit and polarity reversal protection.

TECHNICAL PARAMETERS MPPT SMART Solar 150/85 VE.Can:

• Operating voltage: 12/24/48 V (autodetection), 36V (must be set using software)
• Maximum charging current: 85 A
• Parallel switching: Yes, up to 25 units can be used using VE.Can, or up to 10 using Bluetooth synchronization
• Automatic load disconnection in case of overload: yes
• Maximum panel voltage: 150 V
• Maximum short-circuit current of panels: 70 A
• Maximum efficiency: 98%
• Self-consumption of the regulator: 12V: less than 35mA, 48V: less than 20mA
• Absorption voltage: 14.4 V / 28.8 V / 43.2 V / 57.6 V adjustable Float: 13.8 V / 27.6 V / 41.4 V / 55.2V adjustable
• Charging algorithm: adaptive multistage, adjustable, or preset programs in the controller
• Charging temperature compensation: - 16 mV / ° C resp. - 32 mV / ° C - 64 mV / ° C
• Protections: reverse polarity of the battery poles (fuse), short circuit on the output, overheating
• Operating temperature range: from - 30 ° C to + 60 ° C (full power up to 40 ° C)
• Humidity: 95% (non-condensing)
• Communication port: VE.Direct, 2x VE.Can, Bluetooth
• Color: blue (RAL 5012)
• Battery connection: screw terminals for cable 35 mm2 max.
• PV connection: screw terminals for cable 35 mm2 max.,
• Degree of protection: IP 43 electronics, IP22 connection
• Weight: 4.5 kg
• Dimensions (l x w x h): 216 x 295 x 103 mm

manual-en-6683.pdf

datasheet-smartsolar-mppt-15070-az-150100-ve-can-6684.pdf